More coverage, less overhead.

Yesterday, I wrote about a 2-year-old open-source hardware ESP32-based DAB+ receiver project, but it turns out there's also a ...

The Sentinel Core board measures 170 x 170mm (6.7″ x 6.7″) and should fit into most computer cases designed for mini ITX boards. It has the dual 100-pin connector used to attach a Raspberry Pi CM5, ...

This pint-sized board can handle everything you actually need ...

[Nagy Krisztián] had an Intel 286 CPU, only… There was no motherboard to install it in. Perhaps not wanting the processor to be lonely, [Nagy] built a simulated system to bring the chip back to life.

The ESP32-P4-Pi-VIEWE is a Raspberry Pi-inspired development board equipped with a VIEWE ESP32-P4C6-Core module, combining a 400 MHz ESP32-P4 dual-core RISC-V MCU with an ESP32-C6 chip for Wi-Fi 6 and ...

We've all heard that "if you want something done right, you have to do it yourself." And that’s usually fine when it comes to ...

GPIO Pin control through ros2_control framework prin configuration via URDF parameters reads of digital input values writes of digital output values you can select which interfaces should be available ...

port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software lines, the port must be configured in input mode. All available GPIO pins are connected to the 16 external ...